Fix issues found in static check. - Fix RPM changelog - Fix the GitHub download link - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Fix the GitHub download link - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Fix the GitHub download link - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Fix RPM changelog - Fix the GitHub download link - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Fix the GitHub download link - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Fix the GitHub download link - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Fix RPM changelog - Fix the GitHub download link - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Fix the GitHub download link - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Fix the GitHub download link - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs. - Resolves Bug 1013977 - Slow focus change with ibus-chewing - Resolves Bug 1062133 - ibus-chewing may not handle key event after focus change - Resolves Bug 1073797 - Cannot identify input mode for Chinese IME (ibus-chewing) - Fixed Bug 902866 - ibus-chewing uses dconf but still installs gconf schemas (Also listed as GitHub ibus-chewing #36) - MakerDialog GUI is only loaded when setting dialog is invoked. - Setting is removed from ibus-properties because it can be launched from either: + Executable ibus-setup-chewing: Usually under /usr/libexec + Input method preference in IBus preference. - Fixed github issue #43: First space not able to input Thanks FreedomKnight. - Fixed github issue #44: Update input-events (for libchewing-0.4.0) Thanks hiunnhue. - Fixed github issue #45: Optimize properties handling. Thanks Ueno. - github is now hosting the ibus-chewing tarballs.
sudo dnf upgrade --refresh --advisory=FEDORA-2014-17151
Please login to add feedback.
0 | 0 | Test Case QA:Chewing |
This update has been submitted for testing by dchen.
Taskotron: depcheck test PASSED on i386. Result log: https://taskotron.fedoraproject.org/taskmaster//builders/x86_64/builds/21769/steps/runtask/logs/stdio (results are informative only)
Taskotron: depcheck test PASSED on x86_64. Result log: https://taskotron.fedoraproject.org/taskmaster//builders/x86_64/builds/21769/steps/runtask/logs/stdio (results are informative only)
This update is currently being pushed to the Fedora 21 testing updates repository.
This update has been pushed to testing
This update has reached 7 days in testing and can be pushed to stable now if the maintainer wishes
This update has been submitted for stable by dchen.
Taskotron: upgradepath test PASSED on noarch. Result log: https://taskotron.fedoraproject.org/taskmaster//builders/x86_64/builds/24395/steps/runtask/logs/stdio (results are informative only)
This update is currently being pushed to the Fedora 21 stable updates repository.
This update has been pushed to stable