Start-up speed has been cut in half compared to the previous version.
Color scheme has been updated to reflect Ultimaker Cura rebrand.
The Ultimaker Cura logo has moved from the bottom to the top of the interface. Print status icons have been updated and repositioned.
A new splash screen on Ultimaker Cura startup has been added.
The width of tab functionality changes accordingly to the word space (multilingual).
A slider can now be used to control the quality profile in recommended mode.
Model infill can now be changed using a slider in recommended mode.
Layer view icon, panel and slider have moved to top-right of interface.
The build plate now shows graduations of 10 mm and 1 mm for easy model positioning.
Extruder tabs have become buttons and icons have been updated.
SOLIDWORKS plugin can now be installed using an automatic installer.
When a user updates models in Siemens NX and clicks the button, the updated models replace the models opened in Ultimaker Cura.
Remove thin strips of skin from a model to prevent print head zigzagging, in turn preventing vibrations.
Cutting away skins on steep overhangs makes prints less sturdy. By expanding skins with the thickness of walls, features will be better supported. In addition, features such as towers on top of infill will be stronger.
Printing extra skin directly on top of infill can lead to gaps, curling and pillowing. This is reduced by printing a wall around the skin first, and also improves the printing speed.
Will prevent filling small gaps that are probably filled already, resulting in less strings, better top details and faster prints.
PVA (switch) retraction length is increased, minimum travel distance for retraction is decreased and max count is slightly increased, this reduces stringing by a lot at the cost of slightly increased print time.
Gives the user control over where to place the seam - hide it in convex corners or in easy to remove locations such as concave corners. Don’t let corner angles influence the seam position.
Similar to tetrahedral (octet) infill, but half of the lines are shifted half of the period up. This pattern sacrifices some rigidity of octet infill for greater toughness.
A fractal pattern infill that requires fewer retractions than other infill types. This is useful for flexible materials as it causes less material elongation. The internal structure given by this infill also assists flexible models having more resistance, while retaining ‘soft’ properties in all directions.
Layer start X/Y values can be less than 0 when the machine centre is zero.
This new script performs "post stretch" algorithm to fix the problem of insufficient inner and outer diameters. Thanks to electrocbd for contributing.
Ironing speed settings have been moved to experimental category.
Update Doodle3D plugin to connect with printers. Thanks to mith for contributing.
Updates may require up to 24 hours to propagate to mirrors. If the following command doesn't work, please retry later:
sudo dnf upgrade --refresh --advisory=FEDORA-2017-8d63e44419Please login to add feedback.
This update has been submitted for testing by cstratak.
cstratak edited this update.
New build(s):
Karma has been reset.
This update has been pushed to testing.
See the builds in FEDORA-2017-849317276e - this all has to go in sync!
Bodhi is disabling automatic push to stable due to negative karma. The maintainer may push manually if they determine that the issue is not severe.
This update has been unpushed.
churchyard edited this update.
New build(s):
Karma has been reset.
This update has been submitted for testing by churchyard.
This update has been pushed to testing.
This update has reached 3 days in testing and can be pushed to stable now if the maintainer wishes
This update has been unpushed.
I'm doing some little improvements to the cura package. Also, Cura won't start on Qt 5.9.2 so this is untestable.
karma: -1
churchyard edited this update.
Removed build(s):
Karma has been reset.
This update has been submitted for testing by churchyard.
BTW for anyone main window of cura is not showing up: This is a bug introduced by Qt 5.9.2 and also affects cura 2.7.0, so there's no need to -1 this for that.
churchyard edited this update.
New build(s):
Karma has been reset.
This update has been pushed to testing.
Together with FEDORA-2017-5ebb1d005c this works for me.
This update has reached 3 days in testing and can be pushed to stable now if the maintainer wishes
This update has been submitted for batched by churchyard.
This update has been submitted for stable by churchyard.
This update has been pushed to stable.