cqrlog-2.5.0-2.fc32, direwolf-1.6.0-3.fc32, & 12 more

FEDORA-2021-40e302df94 created by hobbes1069 3 years ago for Fedora 32

Update to hamlib 4.1 and rebuild dependencies.

WSJT-X 2.3.0 General Availability release adds the new modes FST4 and FST4W along with many defect repairs. See summaries below and for the prior release candidates (2.3.0-rc1 through -rc4) of this version for details.

  • FST4/W: Disable envelope shaping at start and end of transmission when environment variable FST4_NOSHAPING=1. Works for fst4sim too.

  • Add time stamp to error message boxes to aid diagnosis.

  • Repair a defect that caused crashes at start up for some macOS Big Sur users.

  • Repair a defect that could cause the jt9 slow mode decoder process to exit incorrectly with a failure status.

  • Updated CTY.DAT file.

       Release: WSJT-X 2.3.0-rc4
             Jan 26, 2021

WSJT-X 2.3.0 Release Candidate 4 is a stop-gap release while some recent important Hamlib changes are being verified. Also included are the following regression and defect repairs.

  • The wsprd command line tool uses the current working directory for the data file directory if it is not specified.

  • Updates to the language translations of the WSJT-X user Interface.

       Release: WSJT-X 2.3.0-rc3
             Jan 6, 2021

WSJT-X 2.3.0 Release Candidate 3 adds an improved FST4W decoder and fixes several defects and regressions discovered since the second release candidate.

  • FST4W: Improve FST4W decoder sensitivity on fading channels and decrease false decode rate.

FST4W uses 50-bit messages and a 24-bit CRC. The 74-bit message+CRC is encoded into a 240-bit codeword. Received messages are decoded by two different decoders: (i) a “belief propagation” (BP) decoder and (ii) an ordered statistics decoder (OSD). The ordered statistics decoder has a knob that allows any or all CRC bits to be treated as additional parity bits rather than as part of the message+CRC field. Thus, the OSD decoder can decode the received message as a (240,50+Nc) code, where Nc is any integer between 0 and 24. In the RC1 and RC2 releases the OSD decoding attempt treated the code as a (240,64) code (14-bit CRC). This release uses 2 OSD decoding attempts that treat the received word as (i) a (240,66) code with 16-bit CRC and code rate 0.308 and (ii) a (240,50) code with no CRC and code rate 0.208. Codewords returned by the (240,50) CRC-less decoding attempt are unpacked and the decode is printed only if it contains a callsign/grid pair that have been previously decoded by the belief propagation decoder (which treats the code as a (240,74) code with 24-bit CRC) or the ordered statistics decoder configured for (240,66) (16-bit CRC). The callsign/grid memory is stored in file “fst4w_calls.txt” which resides in the data directory.

  • FT8: Fixed a crash triggered by double clicking on the waterfall to invoke a decode of a signal in the preceding T/R interval.

  • FST4W: Do not save .c2 files.

  • FST4W: Correct a bug that could cause incorrect operation when using negative noise blanker (NB) percentage to trigger looping over a range of NB percentages.

  • fst4sim: Added simulation of Lorentzian fading spectrum, invoked by negative fspread values.

  • Color highlighting scheme window fixed in dark mode.

  • Reports sent by QSO partners to other stations no longer logged in error.

  • UDP Status(1) message now includes the current Tx message.

  • Example diagnostic logging configuration files included.

  • Use system localization for date fields in Log QSO dialog.

  • Improvements to audio input and output buffer sizes.

  • wsprd: Fails gracefully if data directory does not exist.

  • wsjtx_app_version: new utility to print application version string.

  • Regression causing incorrect working frequency selection when changing modes repaired.

  • Regression with QSO initiation with "Best S&P" repaired.

  • Updated installation instructions for macOS covering M1 hardware.

  • Improved compatibility is Debian 9 required distribution packages.

  • Repair regression with missing time-stamps in the ALL.TXT journal.

  • Allow hamlib_settings.json to work with PTT only configurations so that optional PTT sharing on RTS or DTR can be enabled.

  • Several improvements to main window sizing and layout.

  • Repair regression with OpenSSL libraries being required when LoTW highlighting is not enabled.

  • Repair a defect that caused 2 by 1 callsigns to be incorrectly parsed as non-standard.

  • Several updates to international UI translations.

       Release: WSJT-X 2.3.0-rc2
             Nov 16, 2020

WSJT-X 2.3.0 Release Candidate 2 fixes issues found in RC1 and includes some new functionality that missed the RC1 cut off deadline.

  • Dropped audio samples message box removed, warnings and errors for these are now sent to the WSJT-X system log.

  • FST4W spots to will be augmented such that the server can distinguish the mode being spotted. Spots to will no longer be restricted to WSPR sub-bands.

  • A new internal system and data logging facility used to provide trace, debug, information, warning, error, and fatal error messages. The verbosity and filtering of messages is user definable via a configuration file. Without a configuration file a basic log is written with information, warning and error messages only. Log files are automatically rotated to limit disk usage.

  • Due to some users using inappropriate multicast IP addresses for their interoperating severs the default behaviour now is to only send multicast UDP datagrams to the loop-back network interface. Users who require WSJT-X UDP Message Protocol datagrams to reach other hosts will now have to configure WSJT-X to send on an appropriate network interface, and use an appropriately scoped multicast group address for their server applications. If you are not sure then (or ff02::1 if IPv6 is desired) is a safe choice.

       Release: WSJT-X 2.3.0-rc1
             Sept 28, 2020

WSJT-X 2.3.0 is a program upgrade offering two new modes designed especially for use on the LF and MF bands. FST4 is for 2-way QSOs, and FST4W is for WSPR-like transmissions. Both modes offer a range of options for T/R sequence lengths and threshold decoding sensitivities extending well into the -40 dB range. Early tests have shown these modes frequently spanning intercontinental distances on the 2200 m and 630 m bands. Further details and operating hints can be found in the "Quick-Start Guide to FST4 and FST4W", posted on the WSJT web site:

WSJT-X 2.3.0-rc1 is a beta-quality release candidate for a program upgrade that provides a number of new features, capabilities, and defect repairs. These include:

  • New modes FST4 and FST4W targeting LF and MF bands.

  • Improved noise baseline discovery for more reliable SNR estimates.

  • On the waterfall and 2D spectrum a tool-tip shows the frequency offset under the mouse pointer.

  • The On Dx Echo Doppler compensation method has been modified in response to feedback from Users. Basic functionality is unchanged. See the User Guide (Section 8.1) for more information.

  • Improved user_hardware script or program initiation for WSPR band-hopping mode.

  • Decoded QSO mode message display narrowed to make appended information easier to view without scrolling the window.

  • Option to record the propagation mode in logged QSO records.

  • ADIF v3.1.1 compliance.

  • Option to connect to PSKReporter using TCP/IP for those with very poor Internet connections.

  • Major rewrite of the PSKReporter interface to improve efficiency and reduce traffic levels.

  • Removal of the Tab 2 generated messages.

  • Accessibility improvements to the UI.

  • Tweaked decode speed options for a better user experience with lower powered single-board computers like the Raspberry Pi.

  • Updates to UI translations in Spanish, Italian, Catalan, Chinese, Hong Kong Chinese, Danish, and Japanese.

  • Audio devices only enumerated when starting up and opening the "Settings->Audio" device lists.

  • Option to select the default audio device removed to minimize the likelihood of system sounds being transmitted.

  • Better handling of missing audio devices.

  • Improved and enhanced meta-data saved to .WAV files.

  • More reliable multi-instance support.

  • Included CTY.DAT file moved to installation share directory.

  • The bundled Hamlib library is updated to the latest available which fixes several regressions, defects, and adds new rig support.

  • Fixed some edge-case message packing and unpacking defects and ambiguities.

  • Fix a defect that allowed non-CQ messages to be replied to via the UDP Message Protocol.

  • Fix a long-standing defect with Tx start timing.

  • Repair a defect with style sheets when switching configurations.

  • Repair defects that made the astronomical data window an several main window controls unreadable when using the dark style sheet.

  • Repair a regression with setting WSPR transmitted power levels.

  • Repair a regression with newly created ADIF log file's header.

  • Many other defects repaired.

How to install

Updates may require up to 24 hours to propagate to mirrors. If the following command doesn't work, please retry later:

sudo dnf upgrade --refresh --advisory=FEDORA-2021-40e302df94

This update has been submitted for testing by hobbes1069.

3 years ago

This update's test gating status has been changed to 'ignored'.

3 years ago

This update's test gating status has been changed to 'waiting'.

3 years ago

This update has obsoleted wsjtx-2.3.0-1.fc32, and has inherited its bugs and notes.

3 years ago

This update's test gating status has been changed to 'ignored'.

3 years ago

This update has been pushed to testing.

3 years ago

This update can be pushed to stable now if the maintainer wishes

3 years ago

This update has been submitted for stable by bodhi.

3 years ago

This update has been pushed to stable.

3 years ago

Please login to add feedback.

Content Type
Test Gating
Unstable by Karma
Stable by Karma
Stable by Time
7 days
3 years ago
in testing
3 years ago
in stable
3 years ago
BZ#1914403 klog-1.4.7 is available

Automated Test Results