Automatic update for fwupd-1.8.8-1.eln124.
* Wed Dec 7 2022 Richard Hughes <richard@hughsie.com> 1.8.8-1
- New upstream release
- Add BIOS rollback protection support for Dell and Lenovo systems
- Ensure the device name is set for Intel USB4 devices
- Fix a critical DFU CSR warning when deploying firmware
- Fix a Synaptics RMI issue when updating non-secure devices
- Generate OVAL rules for openSCAP evaluation
- Match more device properties when using GetDetails
- Show the signed reports from QA teams in client tools
- Use the correct AppStream ID for the Key Manifest failure
- Wait for the Intel GPU to come back after updating
* Tue Nov 29 2022 Richard Hughes <richard@hughsie.com> 1.8.7-3
- Disable the libsmbios requirement as it is now unmaintained in Fedora.
* Wed Nov 9 2022 Richard Hughes <richard@hughsie.com> 1.8.7-2
- Fix the lvfs-testing remote
* Wed Nov 9 2022 Richard Hughes <richard@hughsie.com> 1.8.7-1
- New upstream release
- Add a new HSI check for the leaked Lenovo 'Key Manifest' hashes
- Allow parsing metadata more than 1MB in size
- Do not follow symlinks when searching for ESP devices
- Fix a regression when using fwuptool install-blob with FMAP firmware
- Measure system integrity when installing UEFI updates
- Only count the Microsoft hashes when getting the dbx version
- Only use the IFD when the system is Intel-based
- Record more host DMI data when submitting a report for dbx failures
- Support loading CoSWID when only one role has been set
- Use xz-compressed metadata to reduce bandwidth used by ~25%
* Fri Oct 7 2022 Richard Hughes <richard@hughsie.com> 1.8.6-1
- New upstream release
- Allow disabling a DFU device when required
- Fix a regression when getting the i2c bus number
- Fix a small memory leak when reloading the parade-lspcon device
- Fix installing the dbx update when using fwupdtool
- Improve writing CoSWID and uSWID metadata
- Only request the BOS descriptor for newer libgusb versions
- Prevent high memory usage when loading corrupt SREC files
- Reduce the installed package size by more than 30%
- Translate more interactive messages
- Try harder when trying to find the default ESP volume
- Use a higher compression preset for the UEFI splash images
* Thu Sep 22 2022 Richard Hughes <richard@hughsie.com> 1.8.5-1
- New upstream release
- Add new plugin to display SMU firmware version on AMD APU/CPU
- Add support for platform capability descriptors so devices can set quirks
- Always check the BDP partitions when getting all the possible ESPs
- Correctly update Wacom AES devices
- Disable changing sleep mode on Ryzen 6000 systems
- Do not show the 'may not be usable while updating' message for DBX updates
- Fix a critical warning when issuing Secure Boot modem AT commands
- Fix a fuzzing crash when parsing malicious FDT data
- Fix a possible crash when dumping VBE firmware
- Fix a possible critical warning when parsing cabinet archives
- Fix a regression when parsing pixart-rf firmware
- Fix a small memory leak when parsing UF2 files
- Fix checking for invalid depth requirements
- Fix parsing the coSWID firmware ID when encoded as a UUID
- Fix parsing uSWID uncompressed metadata
- Fix uploading to DFU-CSR devices
- Load coSWID metadata from a uSWID MTD block device
- Never save the Redfish auto-generated password to a user-readable file
- Only create users using IPMI when we know it's going to work
- Write all the CCGX metadata block as intended
* Tue Aug 30 2022 Richard Hughes <richard@hughsie.com> 1.8.4-2
- Fix fwupd-devel upgrade issue.
* Tue Aug 30 2022 Richard Hughes <richard@hughsie.com> 1.8.4-1
- New upstream release
- Add a translated title and long description for HSI security attributes
- Add support for reading and writing BIOS settings
- Correctly detect CET IBT
- Do not require UEFI capsule updates for checking TPM PCR0
- Do not show HSI events where we changed the spec result value
- Fix applying the latest DBX update
- Include vfat in the list of possible BDP partition types
- Install all devices with the same composite id in fwupdtool
- Only fail the kernel HSI test for specific taint reasons
- Only show changed events in fwupdmgr security
- Update vulnerable CMSE versions from CSMEVDT data
* Fri Jul 22 2022 Richard Hughes <richard@hughsie.com> 1.8.3-1
- New upstream release
- Add resolution flags to each security attribute failures for the user
- Allow loading in emulated host profiles for debugging
- Check if Intel TME has been disabled by the firmware or platform
- Do not use CoD even when advertized on non-aarch64 platforms
- Fix a crash when updating the Logitech Bolt radio device
- Fix a critical warning when parsing an invalid PHAT record
- Fix a critical warning when parsing invalid FDT firmware
- Fix fwupdmgr security when plugins are added to the blocklist
- Fix parsing SMBIOS data to correct the device hardware IDs
- Fix uploading signed reports by sending the correct checksum
- Use the correct protocol attribute name when exporting to JSON
- Wait for the system to acquiesce after doing each update
* Thu Jul 21 2022 Fedora Release Engineering <releng@fedoraproject.org> - 1.8.2-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_37_Mass_Rebuild
* Mon Jul 11 2022 Richard Hughes <richard@hughsie.com> 1.8.2-1
- New upstream release
- Allow front-end clients to read the percentage property
- Autoconnect the Redfish network device when rebooting the BMC
- Copy the instance ID strings when incorporating devices
- Do not generate a capsule header for the FMP GUID
- Fix a regression for devices using the Atmel FLIP Bootloader
- Show the get-details output when the device requirements fail
- Simply quirk matching for i2c devices to speed up daemon startup
- Use force-detach to bypass the DFU streaming check for camera devices
- Wait for the System76 launch device to re-enumerate if already unlocked
- And, many more devices supported
* Fri May 27 2022 Richard Hughes <richard@hughsie.com> 1.8.1-1
- New upstream release
- Accurately return the last-set status to client tools
- Add X-UsbReceiver as an update category with icon usb-receiver
- Allow clients to opt-in to showing updates with user-solvable problems
- Be more resilient when restarting the Redfish BMC
- Do not mark all Redfish updates as UPDATABLE
- Export the system and device battery levels on the D-Bus interface
- Fix a critical warning on failed modem update
- Fix regression when probing PS175 devices
- And, many more devices supported
* Thu Apr 28 2022 Richard Hughes <richard@hughsie.com> 1.8.0-1
- New upstream release
- Add coSWID and uSWID parsers to libfwupdplugin for initial SBoM support
- Add new HSI attributes for the AMD PSP and various other system protections
- Add support for Corsair Sabre RGB PRO and Slipstream USB receiver
- Add support for FlatFrog devices
- Add support for Genesys GL3521 and GL3590 hubs
- Add support for Google Servo Dock
- Add support for Logitech M550, M650 and K650
- Add support for more ELAN fingerprint readers
- Add support for more integrated Wacom panels
- Add support for more NovaCustom machines
- Add support for more StaLabs StarLite machines
- Add support for more Tuxedo laptops
- Add support for System76 launch_lite_1
- Add support for the Quectel EM05
- Add the runtime fwupd-efi version as a firmware requirement
- Allow Capsule-on-Disk to work in more cases
- Allow 'fwupdmgr install' to install a specified firmware version
- Check the update protocol exists when checking requirements
- Correctly probe USB-2 hubs with more than 7 ports
- Do not add the Windows compatibility ID to capsule devices
- Do not throw away the TPM eventlog when uploading to the LVFS
- Export the version_lowest_raw value correctly
- Fix several small memory leaks
- Mark the ME region device locked if it is read only
- Only show the CLI time remaining for predictable status phases
- Respect the NO_COLOR env variable
- Restart the BMC after installing BCM updates
- Show the device serial number and instance IDs by default
- Support dumping the MTD image to a firmware blob
- Use the correct icon automatically for more hardware
* Tue Apr 5 2022 Richard Hughes <richard@hughsie.com> 1.7.7-1
- New upstream release
- Add signed and unsigned payload metadata to more devices
- Allow overriding the detected machine type
- Allow quirking the flashrom flash size
- Do not add the backup BMC device as it shares the same GUIDs
- Do not allow the DBX update for broken firmware versions
- Don't export USB4 host controllers if they do not have unique GUIDs
- Fix the TPM eventlog replay for Intel TXT machines
- Never send the DeviceChanged signal with invalid data
- Return the correct error when there is no GPIO device to open
- Show the update message and update image in front end tools
- Support the new PENDING upower device states
Please login to add feedback.
This update was automatically created
This update's test gating status has been changed to 'waiting'.
This update's test gating status has been changed to 'ignored'.
This update has been submitted for stable by bodhi