stable

linux-firmware-20230210-147.fc37

FEDORA-2023-6f9eac123e created by pbrobinson a year ago for Fedora 37

Update to upstream 20230210 release:

  • Update AMD cpu microcode
  • brcm: revert firmware files for Cypress devices
  • brcm: restore previous firmware file for BCM4329 device
  • rtw88: 8822c: Update normal firmware to v9.9.14
  • i915: Add DMC v2.11 for MTL
  • Add firmware for Cirrus CS35L41 on UM3402 ASUS Laptop
  • Add missing tuning files for HP Laptops using Cirrus Amps
  • i915: Add DMC v2.18 for ADLP
  • amdgpu: Add VCN 4.0.2 firmware
  • amdgpu: Add PSP 13.0.4 firmware
  • amdgpu: Add SDMA 6.0.1 fimware
  • amdgpu: Add GC 11.0.1 firmware
  • amdgpu: Add DCN 3.1.4 firmware
  • iwlwifi: remove old intermediate 5.15+ firmwares
  • iwlwifi: remove 5.10 and 5.15 intermediate old firmwares
  • iwlwifi: remove 5.4 and 5.10 intermediate old firmwares
  • iwlwifi: remove 4.19 and 5.4 intermediate old firmwares
  • iwlwifi: remove old unsupported older than 4.14 LTS
  • update firmware for MT7921 WiFi device
  • update firmware for mediatek bluetooth chip (MT7921)
  • amdgpu: update vangogh firmware

Reboot Required
After installing this update it is required that you reboot your system to ensure the changes supplied by this update are applied properly.

How to install

Updates may require up to 24 hours to propagate to mirrors. If the following command doesn't work, please retry later:

sudo dnf upgrade --refresh --advisory=FEDORA-2023-6f9eac123e

This update has been submitted for testing by pbrobinson.

a year ago

This update's test gating status has been changed to 'waiting'.

a year ago

This update's test gating status has been changed to 'passed'.

a year ago

This update has been pushed to testing.

a year ago
User Icon bojan commented & provided feedback a year ago
karma

Works.

User Icon nixuser commented & provided feedback a year ago
karma

Doesn't seem to have broken anything so far.

This update can be pushed to stable now if the maintainer wishes

a year ago
User Icon ibims provided feedback a year ago
karma

This update has been submitted for stable by bodhi.

a year ago
User Icon py0xc3 commented & provided feedback a year ago
karma

No AMD cpu/gpu related issues on AMD Ryzen 6000 mobile series. Works fine.

This update has been pushed to stable.

a year ago
User Icon fschwarz commented & provided feedback a year ago
karma

This update breaks booting on my AMD machine (Ryzen 2600 + RX 6600 GPU): Screen is completely blank though the machine boots. Also it does not power off/reboot when try to do that via SSH.

amdgpu 0000:28:00.0: amdgpu: STB initialized to 2048 entries
[drm] Loading DMUB firmware via PSP: version=0x02020017
[drm] use_doorbell being set to: [true]
[drm] use_doorbell being set to: [true]
[drm] Found VCN firmware Version ENC: 1.26 DEC: 2 VEP: 0 Revision: 0
amdgpu 0000:28:00.0: amdgpu: Will use PSP to load VCN firmware
[drm:psp_hw_start [amdgpu]] *ERROR* PSP load sos failed!
[drm:psp_v11_0_ring_destroy [amdgpu]] *ERROR* Fail to stop psp ring
[drm:psp_hw_init [amdgpu]] *ERROR* PSP firmware loading failed
[drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* hw_init of IP block <psp> failed -22
amdgpu 0000:28:00.0: amdgpu: amdgpu_device_ip_init failed
amdgpu 0000:28:00.0: amdgpu: Fatal error during GPU init
amdgpu 0000:28:00.0: amdgpu: amdgpu: finishing device.
amdgpu: probe of 0000:28:00.0 failed with error -22
BUG: unable to handle page fault for address: ffffb4ade06a0000
fbcon: Taking over console
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 1001f6067 PMD 0 
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 10 PID: 540 Comm: systemd-udevd Not tainted 6.1.14-200.fc37.x86_64 #1
Hardware name: Micro-Star International Co., Ltd MS-7C02/B450 TOMAHAWK (MS-7C02), BIOS 1.I0 07/25/2022
RIP: 0010:vcn_v3_0_sw_fini+0x55/0xb0 [amdgpu]

I was able to fix that by downgrading amd-gpu-firmware:

# dnf --showduplicates list amd-gpu-firmware
# dnf install amd-gpu-firmware-20220913-140.fc37.noarch
# dracut --force /boot/initramfs-6.1.14-200.fc37.x86_64.img
User Icon fschwarz commented & provided feedback a year ago
karma

I think I have to retract my statement about non-booting F37 - turns out my GPU has faulty VRAM.


Please login to add feedback.

Metadata
Type
bugfix
Severity
medium
Karma
5
Signed
Content Type
RPM
Test Gating
Settings
Unstable by Karma
-3
Stable by Karma
3
Stable by Time
14 days
Dates
submitted
a year ago
in testing
a year ago
in stable
a year ago
approved
a year ago

Automated Test Results