default & performance tests pass (KVM)

Thinkpad T14s, AMD Ryzen 7840U, Fedora 39, UEFI, Secure Boot, luks+btrfs. Default and performance tests pass OK. Suspend seems to work.

Works for me. The enabled Default and Performance tests pass OK (I cannot upload the results)
Work Station, Asus prime mobo - Ryzen5 5600g/AMDGPU, 400 Series Chipset, (UEFI) Secure boot, SSD's > RAID1 (ext4)

Looks like there are some important reverts in 6.8.4, so it would be great if that made it into today's testing.

I ca see 6.8.4 building on Koji so I assume it will superseded this build.

default & performance tests pass (KVM)

Seems to work fine on bare-metal HP Z440, AMD RX570 with UEFI. Kernel regression tests both PASS, but I haven't tested the previously reported bugs/traces regarding amdgpu yet.

Works.

The bluetooth functionality is not working on my system with this kernel version on Fedora 39.

uname -r
6.8.4-200.fc39.x86_64

After booting up my computer, I found the following message in the log:

dmesg | grep hci0
[    9.237849] Bluetooth: hci0: Reading Intel version command failed (-110)

After executing the following commands: hciconfig hci0 down rmmod btusb modprobe btusb hciconfig hci0 up

I received the following messages:

dmesg | grep hci0
[    9.237849] Bluetooth: hci0: Reading Intel version command failed (-110)
[  311.047741] Bluetooth: hci0: command 0xfc05 tx timeout
[  311.047747] Bluetooth: hci0: Reading Intel version command failed (-110)
[  316.679767] Bluetooth: hci0: Reading Intel version command failed (-110)
[  318.413110] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017
[  318.415080] Bluetooth: hci0: Device revision is 1
[  318.415092] Bluetooth: hci0: Secure boot is enabled
[  318.415096] Bluetooth: hci0: OTP lock is enabled
[  318.415100] Bluetooth: hci0: API lock is enabled
[  318.415103] Bluetooth: hci0: Debug lock is disabled
[  318.415106] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[  318.450163] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
[  318.450183] Bluetooth: hci0: Boot Address: 0x24800
[  318.450185] Bluetooth: hci0: Firmware Version: 255-255.255
[  320.509406] Bluetooth: hci0: Waiting for firmware download to complete
[  320.509860] Bluetooth: hci0: Firmware loaded in 2011408 usecs
[  320.509949] Bluetooth: hci0: Waiting for device to boot
[  320.524997] Bluetooth: hci0: Device booted in 14739 usecs
[  320.525006] Bluetooth: hci0: Malformed MSFT vendor event: 0x02
[  320.533019] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc
[  320.535074] Bluetooth: hci0: Applying Intel DDC parameters completed
[  320.536065] Bluetooth: hci0: Firmware revision 0.3 build 249 week 27 2023
[  320.538076] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.

lspci
08:00.0 Network controller: Intel Corporation Wi-Fi 6 AX200 (rev 1a)

Thank you.

After reporting my previous issue (which happened after the first reboot after the update), it seems that the problem resolved itself after power off-and power on my computer. Apologies for any confusion caused. Thank you, it works for me.

Tested on x82_64 and aarch64; no regressions noted.

Works for me. The enabled Default and Performance tests pass OK

Framework 13 AMD laptop, GNOME/Wayland, UEFI, btrfs. LGTM.

Working fine in a VirtualBox VM.

Works well here. Ryzen 3700x, Rog Strix B550-F, nvidia from rpmfusion.

thinkpad lenovo p16s amd gen2. all works fine. modern standby ok. no issues found for now. regressions tests done and uploaded.

Compared to 6.7.10-200, this kernel release version does not support my Thunderbolt 3 dock properly: My external screen does show "no signal" when setting the refresh rate to 144hz (while 60hz works) on a 3440x1440 screen.

With 6.7.10-200 there are no such issues.

I'm using a Iris Xe iGPU (on a i9 13905H).